• <nav id="ka6yw"></nav>
  • <nav id="ka6yw"></nav>
  • Shijiazhuang Tech-macro Pump Industry Co.,Ltd

    KH Series High Head Slurry Pump

    Model:KH Series
    Head: 12--105 m
    Capacity: 3.6--900 m3/h
    Pump type: Horizontal centrifugal
    Media: Slurry
    Material: Metal, ceramic,etc

    1. Description:

    Type KH pump is heavy-duty single-stage single-suction high-head horizontal centrifugal slurry pump. This type of pump has larger volume and separated wear-resistant layer and bearing layer. It is suitable for transferring high head slurry at high pressure, mostly used for long distance transporting.

    Typical Application:

    ● Iron, cooper or phosphorus mineral processing
    ● Cyclone feeding
    ● Removing ash in power plant
    ● Flue gas desphurization in power plant
    ● Flushing steel mill blast furnace cinder
    ● Removing ash in power plant
    ● Ball grinding mill ore discharging
    ● Other wear-resistant and anti-corrosive working conditions
    2.  Features:

    ● High efficiency, wear resistant, stable performance, interchangeability of parts; high head; energy saving.
    ● Replaceable wear-resistant metal liners, impellers&volute liners are made of wear-resistant metal(such as A05,A49,and other high chrome metal). The bearing layer and the wear-resistant layer can be separated.
    ● High efficiency impeller of large diameter and slow rotation speed ensures the pump with long wear parts using life and low operating cost.
    ● Bearing assembly use cylindrical structure, adjusting the space between impeller& front liner easily, being removed completely when being repaired. Grease lubrication.
    ● Shaft seal could use the packing seal, expeller seal and mechanical seal. One pump also can be use expeller seal accompany with packing.
    ● The discharge outlet can be positioned to 8 directions at intervals of 45 degrees.
    ● This pump can be installed in multistage series to meet the delivery for long distance.
    ● Drive types: direct coupling drive(DC), V belt drive (CR, CV, ZV, CL), etc.
    1. Operating Limits:

    ● Outlet Diameter:25 to 150 mm (1--6 inches)
    ● Flow Capacity:3.6--900 m3/h

    ● Head:12--105 m
    2. Materials: 

    Materials Options  
    Construction Standard Optional
    Wet end parts (Liners,Impellers) High chrome alloy (A05, A07, A08, A09, A11, A49, A33, A61……);
    Composite ceramics
    The material adopted is usually based on the detailed application, or could be according to the customer’s requirements.

    3. Performance Chart:
    Note: Approximate performance of clean water and only for primary model choice.