• <nav id="ka6yw"></nav>
  • <nav id="ka6yw"></nav>
  • Shijiazhuang Tech-macro Pump Industry Co.,Ltd

    KM Series Centrifugal Slurry Pump

    Model:KM Series
    Head: 10--68 m
    Capacity: 200--1600 m3/h
    Pump type: Horizontal centrifugal
    Media: Slurry
    Material: Metal, rubber, ceramic,etc

    1. Description:

    Type KM series slurry pump is designed for transporting liquid containing suspended solid particles, or the high hardness, strong corrosive and high density slurry.

    Typical Application:

    ● Iron, cooper or phosphorus mineral processing
    ● Cyclone feeding
    ● Removing ash in power plant
    ● Flue gas desphurization in power plant
    ● Flushing steel mill blast furnace cinder
    ● Removing ash in power plant
    ● Ball grinding mill ore discharging
    ● Other wear-resistant and anti-corrosive working conditions
    2. Features:

    ● High efficiency, wear resistant, stable performance, interchangeability of parts; excellent hydraulic model.
    ● Replaceable wear-resistant metal or rubber liners, impellers&volute liners are made of wear-resistant materials(such as A05, A49,and other high chrome metal or rubber). 
    ● Bearing assembly use cylindrical structure, adjusting the space between impeller& front liner easily, being removed completely when being repaired. Grease lubrication.
    ● The impeller can be 2--6 blades ones, making the pump more effective. And the pump can achieve in excess of 87% in the best efficiency area,
    ● Shaft seal could use the packing seal, expeller seal and mechanical seal. One pump also can be use expeller seal accompany with packing.
    ● The discharge outlet can be positioned at intervals of 45 degrees by request and oriented to any 8 positions to suit installations and applications.
    ● This pump can be installed in multistage series to meet the delivery for long distance.
    ● Drive types: direct coupling drive(DC), V belt drive(CR, CV, ZV, CL), etc.
    1.  Operating Limits

        ● Outlet Diameter:25-450 mm(1--18 inches)
        ● Flow:200--1600 m3/h
        ● Head:10--68 m

    2. Materials:

    Materials Options  
    Construction Standard Optional
    Wet end parts (Liners,Impellers) High chrome alloy (A05, A07, A08,A09,A11, A49, A33, A61……);
    Natural rubber (R26, R24, R55......);
    Synthetic rubber(S01, S12, S21, S42......)
    Composite ceramics
    The material adopted is usually based on the detailed application, or could be according to the customer’s requirements.

    3. Performance Chart:

    Note:  Approximate performance of clean water and only for primary model choice.